Showing posts with label Maya. Show all posts
Showing posts with label Maya. Show all posts

Sunday, 13 May 2012

Finishing the Door

After talking to a tutor, Mark, at uni, I have since lowered unnecessary edge loops, lowering the poly count. Now all polygons, as far as I can see, contribute to the shape. This didn't take long and was fairly easy.
I then decided to begin texturing. It was the roots I had initial trouble with. I tried hand painting the roots in Mudbox, however, this didn't give me nearly the effect I was after, so I took the diffuse (color) UVs into photoshop. I then tried placing a simple bark texture over the top and setting it to overlay. This didn't look right either, not showing any kind of real texture, although still better than just colour. I then searched the internet to try and find and find a good tutorial. Eventually I found this tutorial on using the Projection tool in mudbox to paint textures straight onto meshes and use them to sculpt with displacement maps. After a long search I eventually found the right texture but it didn't quite fit the colour scheme. I took it into photoshop and shifted the Hues and Levels around until I got a nice brown. After projecting it onto the model I didn't feel like I got the same tone as I did with the hand painted model so I set the opacity of the texture layer to 80% and set the layer to Overlay in mudbox. I then extracted the Ambient Occlusion layer and set it to overlay. After that I extracted the normal map and went back into maya. I then added an lambert material to the roots model and added the diffuse map to the colour layer and the normal map to the bump layer. The effect was perfect.
I then repeated the same process with the door, mushrooms, vines and floor. Once I had the technique down I had no real problems.

Once I had done this though I wanted to look at the foliage around the door. Knowing a good place to start was with flat planes but when I initially started this I found that it looked cheap and flat. After taking a quick jump into Skyrim to look at how the foliage was done there, I found that there were several planes carefully placed to make up the plants and foliage. I looked closely at how they had been arranged in Skyrim and tried to repeat a similar pattern This work very well. With this technique in mind I then looked at the leaf I had in the door frame. The mesh looked rigid and the normal map didn't do much to improve this. I then decided to use use a similar technique used in the Legend of Zelda; Ocarina of Time, the game I was taking inspiration for the door from, and deleted the leaf mesh and merged the vert left on the branch to make a point. I then took a high res leaf photograph and deleted the white background and saved as a PNG to keep the transparency. Then made a plane in maya split it 4x4, just enough to get the rough curved shape of the leaf, and then added the texture on top of it, including a normal map created with a "sculpt by displacement map" in mudbox.

Already being fairly familiar with point lights and directional lights and after having a look at the tutorial emailed to us on rendering from Mark, I set up 3 lights in the scene. One Directional light as a Key Light, for sunlight, which I gave a slightly yellow hue, wanting to give the scene a warm feeling. One ambient point light as a fill light, used for softening the shadow on the door from the roots with a slightly green hue to give the impression of diffuse light coming from the rest of the forest. Finally I set up a rim point light with a cool blue colour on the left side of the door to stop the warm colours of the other lights oversaturating the scene and the give the scene a bit more contrast. After a few test renders I discover that the lighting wasn't taking the transparency of some of the foliage into account. I found that this was because the lights and render setting weren't set to ray trace. After trying this with success in high quality renders with mental ray, I set up a camera with a pivot in the middle of the door and animated it to do a 180 degree swing around the door over 120 frames. I then render on production quality with mental ray into Targa files. I then discovered that I then used Adobe Premiere to compile the Targa files into an MP4 file. Unfortunatly, it is very difficult to find an application that will compile into .mov on a PC so have had to make do with MP4 on H.246 at 720p. This should be enough. If not, hopefully the uni Macs will have a media encoder I can use to convert into .movs.


Monday, 7 May 2012

Door Unwrapping

After finishing the final vine, I decided to deal with the last problem before moving on to UV unwrapping. This problem with the mesh was the bunching up of edge loops caused by the extra geometry need to add the leaf onto the tree. This wouldn't be much of a problem, but the mesh is of a smoother, more organic shape and I would prefer to have only quads on the mesh. Eventually, I decided to delete the entire edge loop up to the leaf itself and then split the, now 5 sided, polygon where the leaf meets the tree in half. This left a tri, so, realising I had just enough space with out causing the edge loops to bunch up again, I created a short edge loop that added an extra vert on the tri, making it a quad. This seems to have had the desired effect.
I next moved on to unwrapping the roots that make up the doorway. Being relatively new to UV Unwrapping I decided to start by faces that made up a visible area and then planar mapping them. Once I had done this with all the polygons I began attaching as many of the shells together as possible to make larger shells that would run smoothing from one to another. Although time consuming and sometimes tedious, I did not find this difficult.
 I am fairly happy with these UVs, although I am a little annoyed that one piece will not attach and stay in scale at the same time (the large piece on the top right). The only reason this annoys me is that it leaves a visible inscision. I am going to have to be careful when texturing not to leave a visible line.

The next thing I unwrapped was the vines. These were especially difficult due to their awekard shape. I figured the best way to do this was to use Automatic Mapping and then straighten up the pieces with the align tools. I then sewed the edges together to make a rectangle, making sure that the edge that was not attached was on the side that is not visible. I then put the ends in the corner of the map, since they are not visible. The mushrooms were fairly easy, The "fruited" mushroom I used Automatic Mapping to create the pieces and then stitched them together so that the incisions could not be seen. The closed cap mushroom I used cylindrical mapping to get the majority of the mesh mapped and then planar mapped the end.
The final thing I needed to Uv was the door. After looking at the Uvs I found that all I needed to do mas manipulate them into a more accurate size.
The only remaining task is to texture, light and render. I have condered making two versions. One that is lower poly and can be taken into a game engine and another that is higher poly and looks smoother.

Sunday, 29 April 2012

After finally finishing the design for the door, I began work on the model in Maya. I decided that the first thing I should do was to start with the roots that surround the door. My first idea as to how to tackle this task was to extrude large cylinders to make the shape of the two "main" roots.
I then attempted to do the same for the other roots and then merge them together. This proved to be extremely difficult and involved far too much freehand vertex manipulation which ended up with an extremely messy mesh. I then, abandoning that method, attempted to extrude the sides of the main roots to create the smaller ones.
This, not only looked ugly, but also proved difficult when doing this with more than one attached root. Although I am sure there were ways to get this method working, I decided it would be easier to try a new method.
I started again by creating the rough shape of the base of the roots with the "create polygon tool" and extruding up. I then merged a few of the verts that made the gap between the roots, while keeping everything as quads. I ended up with a low poly version of what I wanted.
Although I could have subdivided this manually with the "Insert edge loop tool" I realised that this too would require far too much freehand vert manipulation, which is very fiddly and often very inaccurate. I realised I could get a much better result if I import the mesh into mudbox, subdivided once (would have like to have sub-ded more but didn't know if there was a poly limit) and reimported into Maya.
The result was just what I wanted, bar the bunching of the edgeloops at the top, although this does seem to so a good job at emulating the grain of the wood. My next task was to attach the single large leaf on the side of the roots. It was only at this point that I realised I would need more geometry to attach the cylinder like leaf stalk. I used the insert edge loop tool to add the require geometry and merged an 8 sided cylinder onto the appropriate area.
I then extruded and manipulated the cylinder into a stalk shape. I then used to create polygon tool to create the shape of one half of the leaf. I used the interactive split polygon tool to split the shape into quads. I then extruded and manipulated the leaf to give it thickness and a curve. I then lined up the leaf, duplicated it, deleted the required faces and used the merge vertex tool to attach the leaf to the stalk without moving the stalk vertices. I then repeated with the duplicated half of the leaf. I then realised that the leaf was too small and scaled it up by moving the pivot point to the side of the leaf closest to the tree to stop it scaling in the wrong direction.
I then needed to make the door itself. My first attempt was to again use the create polygon tool, split it into quads and then extrude and manipulate it into shape. However, this proved too messy and made the topology too uneven. I then used a box with 5 subdivisions along its height and width, Manipulated it into shape and moved it over to the door frame. It took a fair bit more manipulation to the the door to fit the doorframe well, fit the design and to be able to swing open without noticably passing through the frame.

With all the main elements made, the only things left to model were the smaller details. I made some mushrooms by extruding and scale faces on cylinders; and I made vines the same way, although I want to make one more.
I still have to deal with some bunched up edge loops caused by the extra geometry used to attach the leaf stem and some odd topology on the underside of the leaf. After this I intend on making one more vine, adding some planes for vine leaves and add some sort of ground, possibly with grass. Although I know that Maya can make grass simply using it's fur technology, I would rather use technology that could be imported into a game engine like Unreal. I may, again, use some upright planes onto which grass textures can be placed.

Wednesday, 18 April 2012

Failed to finish Armed & Dangerous on time.

I failed to complete my original Armed and Dangerous challenge in time. This is more or less due to me completley misjudging how much time it would take to sculpt an entire character. I have, nevertheless decided to try to finish the project for the final hand-in. I will also, however, be entering myself in ConceptArt.org's Character of the Week competition, which I will be talking about in another post. I also realise that I have not been posting my progress on the project nearly as much as I should have, I will be attempting to make a much more regular thing of it from now on.

Here is what I have done to the 6 Armed Nutter since I last posted. I managed to finished up the arms with a decent level of symmetry. I did continue to forget to put symmetry on several more times afterwards. My solution to this was to just open up the last save and redo any work that was not done symmetrically.
I then began work on the hands, using my own hands as reference far more than the anatomy books I had been using before for other body parts. I found that once I had spent a large amount of time on one hand, working out all of the nooks and crannys and trying to develop a technique, the next hand looked far too smooth. This was because the first hand had gained texture and, I suppose, character from all of the erasing and retrying in certain areas. The best way I could emulate this one the other hands was to build up or shave away the shape slowly with a weak brush.

I then decided to move onto the jeans. My initial plan was to sculpt the feet into the bottom of the jeans. However, the distortion from this was far too extreme and difficult to work with without moving up to much higher levels of subdivision, which wouldn't have been pratical. I thought, for the time being, I should sculpt the jeans as is they cover the feet and then make the feet as seperate objects in Maya and bring them in later.
I found that the actual fold of the jeans could not be made realistically with just the Wax tool and found that the sculpt tool was much better for creating the inital shape of the creases and folds and the pinch tool gave them the appearance of a sharp fold.

I used this image as reference for the general shape and location of the jean creases.  
Considering the anatomy was bent out of shape by the grin, with the additional problem of the out of proportion cartoon style I found that I need to have a play with the shape of the head before commiting to any particular technique. It was as I was colouring in the teeth, I found that paint would jump to random areas of the mesh or only colour in chunks. After looking at the UV map I realised that this was because of crossing polygons in the UV. I returned to Maya and re-created the UVs using the "Optimize for: Less Distortion" setting on the Automatic Mapping. I then re-imported the UVs into Mudbox. The paint still ocassionally blots out from the area I paint. I think this may be where the polygons of the UVs are spread to wide. I will re-create the UVs soon, this time manually so that I can ensure the paint does as I wish it to.

When I got back to the face I managed to figure out the shape using a mirror, see check how the face distorts, and Classic Human Anatomy by Valerie L. Winslow. However, I did decide it would be better to create the eyes seperately in Maya out of two spheres, one with indentations for the iris and pupil, the other acts and the transparant gloss that causes the specular highlight on eyes. I found it easier to sculpt the eyelids around the spheres than I did when attempting to sculpt the eyes out of the base mesh during my play around. I painted the eye, including the irish and pupil and then gave it a mid grey specular layer, with a slightly lighter colour around the iris for extra gloss. The outer sphere I then painted with an almost black opacity layer, a completly white diffuse layer and an almost white specular layer. I then discover that the outer sphere would not give the desired specular highlight unless I sculpt a bulge over the iris. Although I am happy with how the eye originally looked, the transparent outer sphere is a little foggy since I loaded it up again. This is a problem that needs fixing.
There are still a few things that need to be done:
  • After having a play with sculpting the hair out of the base mesh, I would much prefer to make a seperate mesh that holds the rough shape of the hair. I can then sculpt in texture. 
  • The UVs need correcting manually.
  • I need to work out a definite colour scheme before the final painting. 
  • I need to add smaller details to things like pores, fabric, teeth etc. 
  • I haven't yet even started to look at how I am going to pose the model. Although after a quick go on Mudbox's pose tools, it may be better to use Maya for the final pose and then either reimport into Mudbox or use a normal map to render in Maya. 

Above is the turntable showing where I am at at the moment.

Wednesday, 21 March 2012

Armed & Dangerous: Base Mesh Completed

After a couple of weeks, I have finally finished the base mesh for the "Six Armed Nutter". The production of the arms, torso and legs were all pretty straight forward. The biggest problem I had was with the head. Because of the cartooned style I have chosen to use, his mouth is out of realistic proportion. This made it very difficult to work out the shape and topology using the box modelling technique. I ended up using the edge extrusion technique. I found that, when using this technique, it was much easier to work out the correct topology than if I were to use box modelling methods.
(Left) Edge Extrusion Head. (Right) Box Modelled Head.
As shown above, the head on the left has a mouth that better matches the original proportions shown in the concept art, although the topology is a bit messier than I would ideally like.
The body, arms and legs were all made with boxes and cylinders with their werts moved into the correct position.
After the model was finished, looked at it in subdivision preview mode and found that random faces appeared and other faces detatched from not being merged properly.  Most of this I managed to clean up with Maya's clean-up tool. The rest had to be manually deleted and merged into it's intended place.

Knowing I would be painting the model in Mudbox and not taking the UVs into Photoshop to edit the textures I felt it was save to create the UVs with Automatic mapping. Automatic Mapping flattens out the UVs in the quickest way possible whilst not having anything overlap. If I were taking them into Photoshop, I may then take the time to straighten up the UVs to be clearer.

Once this was done I found it safe to take the model into Mudbox. However, after taking the model into Mudbox, I found that some of the geometry creased in certain areas. Mainly around the forehead between the eyes and at the crotch. This was due to having too many edge loops running throught the middle of the mesh. I had added these when I had miscalculated the number of edge loops need to attach the head and trousers to the torso. However, now that the meshes had been combined, I found it fairly easy to delete a few of these. Only with one did I have to rearrange the geometry around the chin to effectivly get rid of it. This also, by chance, removed some of the polgons making up and meeting at the center of the eye. There is still a 5-pole in the centre of each, but I am considering sinking these into eye sockets and then using 2 spheres inside each other for the actual eyeball.

Front and Side view of the final base mesh
Depending on how the sculpt goes, I may model the hair in maya and then bring it into mudbox. I may also make some weapons for him, since the them of the competition is "Armed and Dangerous".

Tuesday, 20 March 2012

Modelling: Architecture Research.

Our next project is to make a door or window based around the architecture of a game in Maya. My first choice for the game was Mass Effect 3. The main reason being, the game has many different cultures, all of which have different architectural styles. These styles are based around a very well thought out history and visual theme for each individual race. However, the game is extremly long and does not allow the player to return to certain missions, some of which have brilliant but rare architecture. Although I could look up the missions on Youtube or find pictures on Google Images, I feel it would be better to be able to look at the architecture from all angles in game. It is for this reason I chose to look at the Legend of Zelda; Ocarina of Time. I know the game very well, so I can get to areas easily and quickly, and it has several different races, each with their own visual style. This game was also made 10 years ago, so the game lacks detail on its architecture. After looking at the briefing presentation we were given, it says, "Design and produce orthographic drawings
(Front, Side, Top, 3/4 View) of a doorway or window
suited to the game aesthetic." The brief does not say I must create a model that is in the game, just one that is suited to the style. This means I could interpret the style of the game into something with a higher poly count and higher res textures. Although a lot of the archtecture can be a bit unexciting, there are areas where the visual style shines through to give the feeling of a culture.
Hyrule Castle
Hyrule castle, for instance, does not have a particularly unique or insteresting style of architecture. The castle looks like a standard 12th century castle. As similar story can be seen in Market Town.
Market Town
Although there is a bit more style to Market Town than the castle, it still has a very basic medieval theme.
However, when I looked at the other cultures in Zelda, I found there to be much more style and culture that could be shown in something as simple as a doorway or window.
Kokiri Village
 The Kokiri live in hollowed out and painted trees. Although, like much of the game, there is very little detail, there is a very definite "earthy" colour scheme and style.
Link's Kokiri Tree House
I could look at the patterns, colours and fabrics used by the Kokiri and create a more detailed and interesting asset to suit the culture.

Darunia's Chambers
Although the Goron's have much less in the way of architecture there are many clues as to their culture that could go towards producing something for them.

Zora Cavern
The Zora have next to nothing in the way of architecture, using water filled caverns as their homes. Despite this, I could design a cave front decorated with some of the patterns found in the patterns and designs found in the Zora King's Chamber (below).
Zora King
I have, never the less, chosen to use the Kokiri for my asset, since they offer a good oppertunity to produce something with interesting, organic shapes and colours.

The Kokiri are a woodland people that remain children forever (and dress suspisciously like Peter Pan). They are guided by the wise Great Deku Tree. They live in Kokiri Forest where they live in hollowed out trees. As a result their colour scheme is a mixture of browns and greens. The few petterns and shapes created by the Kokiri, like the Kokiri Shield and the Kokiri Emerald, all uses desaurated earthy colours and flowing organic shapes. With this in mind, and a bit more research, I believe I can create a door for their tree-houses in Maya.

Tuesday, 6 March 2012

Armed & Dangerous

Our next uni assignment is to find an online competition that requires you to use skills used in game art. This includes 2D artwork, 3D Sculpting and Modelling and animation. I chose the "Armed & Dangerous" Mudbox challenge. The aim of the competition is to sculpt a character that is "armed and dangerous". I have spent the last week creating orthographic concept art of a character I call (working title) "The Six Armed Nutter".
I started with an initial sketch of the sort of character I wanted. and then worked out each element of the character as needed. Looking back, I should have created several initial sketches and picked my favourite.
The initial, very rough sketch.
Since the competition allowed a lot of leeway for personal tastes, I picked the same sort of mad, surreal kind of character I enjoy drawing. This was a bad idea. Since this competition is just a way of increasing my abilities, I should have tried something novel and learnt how to draw a new type of character.
Once I had my initial sketch I began looking for images online that worked with the sort of character, and the style, I wanted to create.
A collection of images used for reference and influence for the concept art.
I wanted the character to be insane and, much like the joker or the cheshire cat (American Mcgee's Cheshire Cat inparticular), the character needed a nice wide, evil grin. Already having a cartoon style, I wanted to make the bigger than it proportionally should be. After playing around with proportions I decided to move the top of the mouth to where I would usually put the nose (halfway between the brow and chin) and make the chin slightly smaller. I also made the skull slightly elongated to make room for the mouth to reach right back without making the jaw or cheekbones seem small or non-existant.
Studies of mouths from American Mcgee's Cheshire Cat, Jamie Hewlett's Murdoch and Marvel's Venom. On the right I have tested out a few different mouths and head shapes, finding out what works best.

Once I had the mouth, figuring out the rest of the face was fairly simple. I already knew that, if a character is grinning whilst the eyes are frowning, the character looks more than a touch sinister. I found that by keeping this expression and raising one eyebrow, I could make the character look even more mad and unnatural.
On the left are the final workings out for the head shape. The profile and front view on the right side of the page are the final designs.
The final thing to do was to take a quick look at his anatomy. I already knew that I wanted him to be skinny, with tone. I also know enough about anatomy that I only occasionally need reference for a more cartoony character. The only real problem I had was figuring out how the extra 4 arms where going to attach. All drawings of Hindu Gods have the arms one on top of the other. This only works when working in 2D from a front view. I figured my best option was to have them running down the side of the torso. One on the side of the ribcage, the other one the external oblique just before the character's jeans begin.
Once I had worked out what each part of him would look like, I put the parts together by drawing him in photoshop in front and side orthographic views. The only problem I had here was that he seemed too human. His face, and the fact he had an extra 4 arms, were the only things that made him seem off, I want to really throw people off. I looked into how the hands of Yoda and the District 9 "Prawns" where design and decided to do a similar thing, making him feel more alien.
Final Orthographic Concept Art
I plan on making one more piece of concept art before I start sculpting. A 3/4 posed, roughly valued and coloured digital painting of the 6 armed nutter. In the meanwhile, I plan on creating the base mesh myself in Maya using Digital Tutor's "Creating Digital Humans" series. Although, I only intend on creating a rough block out with good enough topology to sculpt with. I want as much of it to be sculpted as possible.
So far I have blocked out the torso.

Progress with the torso base mesh.

Sunday, 26 February 2012

Jump Cycle Finished

I have managed to complete the jump cycle animation. As usual I used Richard Williams' The Animator's Survival Kit as reference for the key frames. However, I ran into a few technical problems whilst placing them. The first was that the right arm of the rig's zero position changed towards the end of the animation, meaning I couldn't make a loop cycle. Fortunately I found out the it was because, at some point, I had moved the position of the shoulder without realising. The next problem was that the movement of the arms from one key frame to the next was not direct, meaning the arms waved about, seemingly at random in between each keyframe. Because the jump is much more of an extreme action than the run or the walk, I did not think the move the arms the shortest possible distance to the keyframe location. As a result, the rotation values exceeded what they needed to be and Maya interpolated this either backwards, or rotating around twice before reaching the key frame position. When this action is squashed into only a few frames, the arms looked as if they were waving around at random. I found that the best fix was to place the arm in the position I wanted and the rest the x,y and z rotation values to zero and then move the arm back to where it was using the shortest possible route. In future I will simply have to remember to take the shortest route every time.
Although I believe that everything is there in the jump, I do not think it was executed particularly well. I would have liked to have spent more time tweaking it. Although the logical solution to this would be to just keep more focused during a project, which is something I have been working on, I work better under pressure. I will continue to work on my ability to stay focused before the deadline begins to loom, but I think a plan to avoid such problems as rushed elements would be wise. After about halfway through any project, everything needed for the completed piece, animation, sculpture, game, essay or otherwise, is there. The rest is tweaking. I should have laid out the keyframes of all three loops before begining to tweak and clean up the curves of each loop. This way I could avoid having 2 good animations and one inferior one.

Thursday, 23 February 2012

Run Cycle

Run Cycle Finished!

After having a play in the curves editor, I have managed to get most of the shake out of the right leg in the walk cycle by reducing the the movement of the leg on the Z axis. Although the shake is still there, it is small and barely noticable. If time allows I will return to it, otherwise I need to get on with the jump.

I have also finished the run cycle, cleaning up the curves and getting rid of any unnecessary key frames. I have also chosen to keep the hands and arms as they were after the advice of a tutor. Mark, my tutor said that he liked the arms as they were but I should lower the angle of the elbows, as they were the arms looked like they were intentionally moving as opposed to the floppy look I had in mind. Mark also pointed out that, as a run, Moom needs to spend more time in the air with both feet of the ground. With this in mind, i went back to The Animators Survival Kit by Richard Williams and found that Moom lands his front foot on the ground a frame early. After adjusting this, I am still not sure if this will be enough and I, again, will return if time allows. For now I am fairly happy with the run and think that it looks believable and smooth.

As Blogger seems to have trouble having two videos uploaded into one post, I will make a seperate post for the run cycle.

Saturday, 18 February 2012

Random Maya Fail.

A few minutes ago, after spending 2 or 3 hours working on my run animation, Maya decided to crash and corrupt the save. When I tried to reopen the file I found it to be empty.
Luckily after some searching I managed to find a file with the same name as the original same with a different file extension. I can only assume this is a backup file Maya makes for situations like this. The file was the moom animation BEFORE I did 3 hours work on it. Still, better than starting from scratch and I should be able to do everything much quicker now that I've done it once.

Thursday, 16 February 2012

The Run Begins

After a lot of staring at the Maya blankly, I have managed to figure out why the back leg appears to twitch during the walk cycle inbetween the "contact" and "drop" key frames (Richard Williams, 2001). The leg becomes fully extended in-between the two frames which causes the leg to look like its shaking when played back in full time.
The leg becomes fully extended in-between the "contact" and "drop" key frames.
 This problem can be fixed fairly quickly in the curve editor once I have finished the run cycle.
I have also placed all the necessary key frames for the run and the preparation for the run. The preparation for the run, after some tweaking, still feels a little sudden. Hopefully, this problem can be fixed in the curve editor, maybe by stretching the curves over a longer time period. The run itself is looking pretty good, apart from the hands, which I have kept limp in order to better illustrate the inertia put on them during the run. This looks odd and I may choose to tense up his arms and put his hands into fists to make it more obvious Moom is running.
The arms feel a little limp for a run. I may change them to something more obvious for a run.

Sunday, 5 February 2012

Walk Cycle Video

For some reason this would work in my previous post.

Learning Maya & First Animations

Over the past few weeks, I have spent a lot of time learning the Maya software package. Having used 3ds Max before and knowing that I prefer modelling to animation, I felt that this would be the best thing to learn in Maya in order to get comfortable with it. I used the Digital Tutors Introduction to Modelling in Maya to partially model a swiss army knife. Because in this segment of the course we're focusing on animation I didn't feel the need to finish the tutorial, just get myself aquainted with the feel of the software before attempting animation.


Once I felt comfortable in the software and had made enough basic, trivial mistakes to try some animation. In a tutorial in university we were instructed on how to make a bouncing ball. Thanks to previous experience in 3ds Max, I didn't find the animation concepts too difficult to grasp. I am, however, entirely new to the graph editor. Once I had gotten the hang of the logic involved in using this new tool, I found animation to be a generally simpler and more enjoyable experience.

I am pretty happy with the results of the bouncing ball excercise. After seeing other people's final results I have noticed that I have gone for a much more "cartoony", exagerrated style. My squash and stretch is fairly extreme. I don't necesarily feel that this brings the animation down though. What I do feel brings it down is the sudden and extreme squash when the ball hits the ground. I feel like the amount of squash is right, but the lack of transition between the two extreme states annoys me a touch. I have tried playing with the curves in the few frames I have when the ball is in contact with the floor but I can't get it to look right, even when I add more key frames. I feel like, If I had more frames to work with, I might get a better result.

The next excercise in animation was a walk cycle using a ready made rig, sweetly named, Moom. Needless to say, this excercise was much more difficult than the previous one and required much more patience and skill. Luckily, in anticipation of the animation unit, I bought a copy of Richard William's The Animator's Survival Kit. The book contains pictures of what a walk should look like frame by frame, as well as extremly useful information as to why the illustrations work. For instance, one extremly useful piece of information was that when the front foot makes full contact on the floor and all of the weight is shifted to that foot, the bend in the knee needs to be greatly exaggerated. For some reason, when the knee is bent to a realistic level, which is only slightly, the animation looks like it isn't carrying any weight and just looks like it's "floating". With this information, I managed to get the feet moving in a convincing way. I believe that a lot of the best learning come from working something out for yourself and making mistakes. It was with this thought that I decided to work out the arms for myself. My first attempt at the arms had them simply swaying back and forth. This looked extremly unrealistic and gave no sense of inertia. When adding a bit of overlap running through the arm and down to the fingers the effect was much more convincing, even if the walk now looks a little too overly casual.

The only realy frustrating problem with the walk is that, at one specific point in the animation loop, the left leg shudders. I have inspected the curves and gone over the frames in that area slowly to try and catch the problem, but unless the animation is playing the problem doesn't visibly exist. I will have to consult a tutor on the problem. In the meantime, I am going to attempt to add the run cycle onto the walk.